Natural Gas Radiant/Convection Fire
Victorian Arch facia with mantle
The Nectre Wonderfire is designed to best suit a period styled home. The natural gas fire will confidently supply warmth to a 45m2 living space.
"Nectre Wonderfire is a traditional heater with all the sytle and grace"
The Heart of the Heat
We all enjoy the sight of a living, dancing fire, set in a traditional mantel fireplace. But there is the wood to chop, the fire to set and ash to clean. Unless of course you install a Wonderfire. A Wonderfire looks so real you could be forgiven for believing the coals or wood logs are real. In fact they are made of ceramics that not only look realistic but reach their maximum temperature in a matter of minutes. At its heart is a sophisticated ceramic venturi burner that proportions and premixes the gas to ensure complete combustion. At 1200oC it gives a real fire glow at the base of the coals or logs. The gases then pass through secondary slots, are mixed with more air and then burnt again to produce clean flames that dance and shimmer like a real log fire."It's a system that no other gas fire can match for warmth and effect"
Warmth at the push of a button
The Wonderfire offers the convenience of an electronic
ignition system that incorporates a pilot light for ease of
operation or you might also choose our optional remote
control. Safety is also an important feature of the Wonderfire.
A flame failure device automatically turns the gas off in the event
of the fire going out.
Wonderfire fan forced performance
Designed to maximise the heat produced by the burner, the Wonderfire fan forced box incorporates a unique heat exchanger at the top of its firebox. The hot exhaust gases heat the air in the heat exchanger and transfers this warm air back into your room with the assistance of a fan. The Wonderfire Fan Forced Box can be installed into an existing chimney using one of our existing Federation or Victorian cast iron fascias or can be adapted by your Wonderfire Dealer into a new installation using the ‘Easy-fit’ version where no masonry is required.
Fits an existing fireplace, wonderfully
Walk into a room with an open fireplace, complete with mantel and decorative surrounds and you are immediately drawn to it. It is a feature that always becomes the focal point of a home. But not everyone wants the odour or inconvenience of a wood fire. Wonderfire is the answer! The simplest way to rejuvenate and existing fireplace, turning it into a smokeless open gas fire, is to install the Wonderfire. Fit the Wonderfire using a new freestanding grate or your existing grate can be adapted. You can dress up your new Wonderfire by installing it in one of our standard Federation or Victorian decorative castings. Now available with electronic ignition and optional remote control or a manual unit with piezo ignition.
How do you achieve the warmth and character of a real fire where no chimney or fireplace exists? It’s easy with Wonderfire Easyfit. So easy you can do it yourself. The Easyfit system comes pre-assembled including the cast iron surround of your choice (Edwardian or Victorian),zero-clearance fan box with gather, manual or electronic Wonderfire burner in log or coal. Add a traditional timber mantelpiece and what was once a blank space becomes the elegant focal point of your room. The Wonderfire Easyfit can be placed directly onto a wooden floor, connected to gas and a single skin flue that extends 600mm above the roof. You can fabricate a chimney breast around the unit yourself or have your sales consultant organise this for you.
Wonderfire Fan Forced Box
The fan forced box, is an accessory for the Wonderfire model AF180F. It incorporates a unique heat exchange situated at the top of the box and a 3speed fan to circulate heated air around your room. The fan forced box can be fitted into an existing chimney using a standard cast iron fascia. Electrical connection. 240VAC, standard 3 pin 10amp plug, 3 speed fan.
Wonderfire Zero Clearance Fan Forced Box
Even if you do not have a chimney, you can use the zero clearance fan box with your own cast fascia or use our “Easy-fit” system which incorporates the zero clearance fan box with either our Federation Tiled Fascia or our Victorian Arched Fascia, already fitted together to save you time, hence the name “Easy-fit”.
Federation Tiled facia
Stainless steel facia
Dimensions of Nectre Wonderfire
350mm (h) x 460mm (w) x 230mm (d)
Wonderfire Fanforced Box
570mm (h) x 500mm (w) x 270mm (d)
Wonderfire Zero Clearance Fan Forced Box
805mm (h) x 500mm (w)* x 270mm (d)**
* allow 75mm clearance each side
** plus 25mm rear clearance
Glen Dimplex Australia continually strives to improve the performance of all our Nectre heaters and stoves. We reserve the right to change or alter sizes and or specifications without notice.