Videos
& Tips
  • Instagram icon
  • Wix Facebook page

© 2019  All rights reserved, Nectre is a registered trademark of Glen Dimplex Australia

Glen Dimplex Australia proudly supports the activities of Landcare Australia through its membership of the AHHA

Brands by Glen Dimplex Australia

Information

Nectre N60

The Nectre N60 is beautifully compact but yet powerful enough to heat around 140m2 of living area. With its high efficiency rating and modest heat output, the Nectre N60 is a welcome addition to your living space.

Tiled Sides

(white only)

Curved Sides

84%

0.60g

8-10hr

15sq

420mm

6.0mm

15kW

.044m3

Radiant/Convection Wood Heater

Nectre N60 dimensions

Naked sides size :    454mm (w) x 1037mm (h) x 506mm (d)

Tiled sides size :       516mm (w) x 1037mm (h) x 519mm (d)

Curved sides size :   581mm (w) x 1037mm (h) x 508mm (d)

 

Naked Sides

"The Nectre N60 is very stylish yet functional and powerful wood heater with an unbelievable efficiency of 84% and amazingly low emissions of 0.60g"

Wood Heaters  |  N15 Mk1  |  Mk2  |  Mk3  |  MEGA  |  Inbuilt  N60

"A European styled look with outstanding efficiency, which has been proudly designed and manufactured in Australia"
 

Additional Features

Nectre N60 is finished in black metallic paint and comes with steel door with ceramic glass and a stainless steel handle. Steel baffle with steel brick retainer and firebrick lining to improve thermal mass.

  • A 720mm x 720mm hearth is required.

  • Door aperture is 305mm x 380mm.

  • Total weight of the Nectre N60 is 190kg.

  • 10 year firebox warranty on Nectre N60.

Installation


We recommend having a professional install any of our Nectre heaters. Our Dealers can arrange installation and most cases will undertake a site inspection to determine the correct location.

Download a single

page brochure.

Nectre_Brochure 2019_WEB_Page_01.jpg

Download the Nectre

Traditional range brochure.

Heater Clearances

Installation clearance distances for the Nectre N60 are as follows:

    100mm from rear of heater to wall in a standard installation (square to walls). All models.
   450mm from side of heater to wall in a standard installation (square to walls). for Naked. 190mm for Curved. 285mm for Tiled.

   500mm from rear corner of heater to wall in corner installation for Naked. 125mm for Tiled and Curved.

Flue and Hearths


Nectre N60 is not supplied with a flue from the factory. Our Dealers all provide suitable a flue and or decromesh kits required for installation. Nectre heaters do not come with hearths, our Dealers can supply a suitable hearth for your requirements.

Compliance


The Nectre N60 has been designed and manufactured to exceed the strict AS/NZS 4013 standards for emissions of 1.5g / kg of fuel burnt and efficiency of 60%. 

FAQ

 

 

                   

                   Always burn seasoned

                   dry hard wood.

 

Radiant / Convection Heat


The Nectre N60 fires release their heat through a combination of heat radiation, which heats objects, and convection which heats the air. Excellent for feeling the heat of the flame and warming the surround living space.

NATA Tested


The Nectre N60 has been tested and approved in a NATA accredited testing facility of Adelaide Heating Technology Pty Limited.

 
Technical drawings for the Nectre N60
 
 

Product disclaimer

Glen Dimplex Australia continually strives to improve the performance of all our Nectre heaters and stoves. We reserve the right to change or alter sizes and or specifications without notice. Efficiency quoted are peak based on a low burn cycle. Burn times quoted are up to and can vary depending on wood, installation and heater condition. Emissions quoted are grams per kilogram. Safety, emissions and efficiency testing is in accordance with AS/NZS 4013, AS/NZS 4012, AS/NZS 2918:2001

 

NAKED SIDE MODEL

CURVED SIDE MODEL

TILED SIDE MODEL

STANDARD INSTALLATION

NAKED MODEL

STANDARD INSTALLATION

CURVED MODEL

STANDARD INSTALLATION

TILED MODEL

Flue shielding AS/NZS 2918:2001 standard 6" flue kit
900mm stainless steel flue shield
NAKED SIDES     A = 75mm,  B = 450mm, C = 250mm

CURVED SIDES  A = 100mm, B = 190mm, C = 250mm

TILED SIDES       A = 100mm, B = 285mm, C = 250mm

 

Flue shielding AS/NZS 2918:2001 standard 6" flue kit

Decro-mesh with 900mm inner reflector

NAKED SIDES       A = 125mm,  B = 450mm,   C = 250mm

CURVED SIDES  A = 150mm, B = 150mm, C = 250mm

TILED SIDES       A = 125mm, B = 240mm, C = 250mm

 

CORNER INSTALLATION

TILED MODEL

CORNER INSTALLATION

CURVED MODEL

CORNER INSTALLATION

NAKED MODEL

Flue shielding AS/NZS 2918:2001 standard 6" flue kit

Decro-mesh with 900mm inner reflector

NAKED SIDES     C = 250mm,  D = 225mm

CURVED SIDES  C = 250mm,   D = 125mm

TILED SIDES       C = 250mm,  D = 125mm

 

Flue shielding AS/NZS 2918:2001 standard 6" flue kit
900mm stainless steel flue shield
NAKED SIDES     C = 250mm,  D = 225mm

CURVED SIDES  C = 250mm,   D = 125mm

TILED SIDES       C = 250mm,  D = 125mm