Videos
& Tips
  • Instagram icon
  • Wix Facebook page

© 2019  All rights reserved, Nectre is a registered trademark of Glen Dimplex Australia

Glen Dimplex Australia proudly supports the activities of Landcare Australia through its membership of the AHHA

Brands by Glen Dimplex Australia

Information

Nectre Mk3

The Nectre Mk3 is beautifully compact but yet powerful enough to heat between 240-270m2 of living area. The Mk3 has a very generous firebox and is compliments any living space

62%

1.1g

8-10hr

24sq

500mm

6.0mm

21kW

.070m3

Radiant/Convection Wood Heater

Nectre Mk3 has been designed to be a performer with attitude and elegance.

3 Speed Remote Control Fan as standard

"A Woodstacker that is not only powerful but traditionally designed and built in Australia"
 

Additional Features

Nectre Mk3 is finished in black metallic paint and comes with cast iron door with ceramic glass and a stay cool spring handle. Steel baffle with steel brick retainer and firebrick lining to improve thermal mass.

  • A 900mm x 900mm hearth is required.

  • Door aperture is 250mm x 495mm.

  • Total weight of the Nectre Mk3 is 160kg

  • 10 year firebox warranty on Nectre Mk3

Installation


We recommend having a professional install any of our Nectre heaters. Our Dealers can arrange installation and most cases will undertake a site inspection to determine the correct location.

Standard 3 Speed Fan


The Nectre Mk3 is fitted with a 3 speed remote control fan. Cleverly designed to be effective without being intrusive. Enjoy the powerful twin barrel power on hi speed. The Mk3 can be used either with or without the fan on.

Heater Clearances

Installation clearance distances for the Nectre Mk3 are as follows:

   150mm from rear of heater to wall in a standard installation (square to walls).

   400mm from side of heater to wall in a standard installation (square to walls).

   150mm from rear corner of heater to wall in corner installation.

Flue and Hearths


Nectre Mk3 is not supplied with a flue from the factory. Our Dealers all provide suitable a flue and or decromesh kits required for installation. Nectre heaters do not come with hearths, our Dealers can supply a suitable hearth for your requirements.

Compliance


The Nectre Mk3 has been designed and manufactured to exceed the strict AS/NZS 4013 standards for emissions of 1.5g / kg of fuel burnt and efficiency of 60%. 

FAQ

 

 

                   

                      Always burn seasoned

                      dry hard wood.

 

Radiant/Convection Heat


The Nectre Mk3 release their heat through a combination of heat radiation, which heats objects, and convection which heats the air. Excellent for feeling the heat of the flame and warming the surround living space.

NATA Tested


The Nectre Mk3  has been tested and approved in a NATA accredited testing facility of Adelaide Heating Technology Pty Limited.

Product disclaimer

Glen Dimplex Australia continually strives to improve the performance of all our Nectre heaters and stoves. We reserve the right to change or alter sizes and or specifications without notice. Efficiency quoted are peak based on a low burn cycle. Burn times quoted are up to and can vary depending on wood, installation and heater condition. Emissions quoted are grams per kilogram. Safety, emissions and efficiency testing is in accordance with AS/NZS 4013, AS/NZS 4012, AS/NZS 2918:2001

 
Technical Details of Nectre Mk3
 
 

CORNER INSTALLATION (to combustible wall)

Flue shielding
900mm rear flue shield
C = 150mm , F = 300mm


Decro-mesh with 900mm inner reflector & DLR *
C = 150mm, F = 300mm

8" Solid Flue Shield with DLR* and 900mm rear heat sheild (130mm wide)

C= 150mm, F = 300mm

 

Door aperture is 250mm x 495mm

STANDARD INSTALLATION (to combustible wall)

Flue shielding
900mm rear flue shield
S = 400mm, R = 150mm, F = 300mm


Decro-mesh with 900mm inner reflector & DLR*
S = 400mm, R = 150mm, F = 300mm

 

8" Solid Flue Shield with DLR* and 900mm rear heat shield 

(130mm wide)

C= 150mm, F = 300mm

Door aperture is 250mm x 495mm

*DLR - Decromesh Locator Ring (supplied standard)